Concept

Spherical aberration — where it appears

The extent of a spherical mirror's caustic, which grows as the square of the aperture and is the amount by which the mirror fails to focus. It goes as the square of the aperture, so a narrow enough bundle from a sphere passes for a focus and a wide one does not.

Named by 5 essays across 2 fields — each of them below, with the objects they name alongside it.

184 mm of causticvertex radius 1.60 m, aperture 1.24 m184 mm of envelope

Where the focus went

If the reflected rays do not meet at a point, they meet each other in pairs, and the curve they are all tangent to is what the mirror has instead of a focus. On a sphere of 1.6 m vertex radius it is 184.1 mm long and has a cusp; near the axis it sits at R/2, which is why a small enough spherical mirror passes for a good one. This is the bright shape in the bottom of a coffee cup, computed rather than admired.

mirrors · Caustic
focus, R/2 = 0.800 m184 mm of causticvertex radius 1.60 m, aperture 1.24 m5e-9 mm against 184 mm

The one shape that focuses

A paraboloid takes every ray parallel to its axis exactly through one point — 4.8e-9 mm of envelope across a 1.24 m aperture, which is arithmetic. A sphere with the same vertex curvature spreads the same bundle over 184.1 mm. So there is exactly one curved mirror that is a projection through a centre, it is a projection for exactly one bundle of rays, and every telescope in the world is built out of that sentence.

mirrors · Paraboloid
cusp — R/2 = 0.800 mvertexaperture 50 cm of a mirror of radius 1.6 mR from the cusp: 1.5996 m (0.023%)

The caustic is the mirror's own ruler

Four of the five instruments in this row return a ratio and refuse a size. The bright curve a mirror throws is the exception, and the reason is that it is a length lying on the table rather than an angle in a picture. Its tip is the paraxial focus, so a ruler laid from the mirror's vertex to it returns the radius of curvature — 1.5996 m against 1.6, and exactly right on a paraboloid, where there is no aberration to bias the envelope.

mirrors · Caustic
0501000.2000.4000.600half the mirror's aperture (m)how wrong the fitted radius is (%)how wrong the answer ishow wrong the fit says it ismeasurement floor, 0.02°a paraboloid fitted to a sphere of radius 1.6 mhidden below 0.3 m of aperture · 0.030% of bias there

A fitted radius is wrong before it is uncertain

A sphere and a paraboloid of the same vertex radius agree to second order, so a fit over a small aperture cannot separate them. What it does instead is return a confident radius that is wrong by a stated percentage, with a residual far below any measurement floor — 0.03% of bias behind a residual of three ten-thousandths of a degree. The residual only clears a two-hundredth of a degree at six times the aperture, by which point the bias is thirty-six times larger.

mirrors · Paraboloid
parallel in, no common point out18.6 mm of spread

A ball of water has no eye either

A flat interface is not a projection through a centre and misses by ten millimetres. A sphere of water misses by more than that on a ball the size of a plum — 1.3 mm on a fifty-millimetre radius, and the axis crossings spread over 18.6 mm at seven tenths of the aperture. But at two per cent of the radius the same fit returns 24 nanometres, so a ball does have a centre — one at zero aperture and none by the time it is gathering any light.

refraction · Nocentre

Named alongside it

The objects these essays reach for when they reach for this one.

CausticEnvelopeParaboloidAperturecentre of projectionFocusRay tracingConditioningCuspFocal lengthinstrument limitNot a projection

All concepts